Selecting A Tool Increases The Machining Center's Efficiency By 30 Percent

Selecting A Tool Increases The Machining Center's Efficiency By 30 Percent

The processing center is widely used in the production of fixtures and molds, processing of mechanical parts, carving of crafts, manufacturing of medical equipment, and education training industry. The selected cutting tools are also different according to different USES. Choosing the right cutting tools can not only guarantee the processing stability, but also improve the processing efficiency. Next, I will introduce several kinds of cutting tools for you to use in different processing occasions.

One, Face Milling Cutter

Face milling cutter is mainly used for vertical milling machine processing plane and step surface. The main cutting edge of face milling cutter is distributed on the cylindrical surface of milling cutter or on the electrical cone surface of circular machine tool. According to the structure, the face milling cutter can be divided into integral face milling cutter, carbide integral welded face milling cutter, cemented carbide clamping type face milling cutter, carbide indexable face milling cutter and other forms.

Two, Column Milling Cutter

Cylindrical milling cutter is mainly used for horizontal milling machine machining plane. Cylindrical milling cutter is generally integral type. The main cutting edge is distributed on the surface of the cylinder without the auxiliary cutting edge. Milling cutters are divided into thick and thin. The number of teeth of rough tooth milling cutter is less. The number of teeth of fine tooth milling cutter, working flat, suitable for finishing.

Three, Keyway Milling Cutter

Keyway milling cutter is mainly used for vertical milling machine on the round head closed high speed machining center groove. The milling cutter is shaped like an end milling cutter, with no top hole on the end face. The end face cutter teeth open from the outside circle and have a small spiral Angle, which enhances the strength of the end face cutter teeth. The cutting edge on the teeth of the face cutter is the main cutting edge, while the cutting edge on the cylinder is the auxiliary cutting edge. When processing keyway, each time along the milling cutter axis feed smaller amount, and then along the radial feed, such repeatedly, that machine tools electrical equipment can complete keyway processing.

Fore, End Mill Cutter

End milling cutter is the most widely used CNC machining center milling cutter. Also is our cheng hai numerical control configuration most processing center tool. It is mainly used in vertical milling machine processing concave, step surface and forming surface. The main cutting edge of the end milling cutter is distributed on the cylindrical surface of the milling cutter, and the side cutting edge is distributed on the end face of the milling cutter, and the center of the end face has a central hole, so when milling, it is generally not possible to feed along the radial direction of the milling cutter, but can only feed along the radial direction of the milling cutter. The end milling cutter also has rough machine tool electrical teeth and serrated teeth, rough tooth milling cutter of 3-6 teeth, generally used in rough machining; The cutter teeth of the serrated milling cutter are 5-10, suitable for finishing. The diameter range of the end mill is 2-80mm, with straight shank, Morse taper shank and 7:24 taper shank.